Fleas are pests that can reproduce quickly if you don’t deal with them properly. However, since the price of commercially available flea products is quite high, you may also want to use dish soap to get rid of it. The best way to do this is to bathe your companion and wash it in dish soap. Alternatively, if he doesn’t like the bath, you can also use a spray bottle and dish soap to kill fleas easily without breaking the bank.
alternative you can look :https://howtogetridoffleasinthehouse.com/home-made-flea-spray/
Fill the bathtub with lukewarm water to around 20 ° C. This temperature is hot enough for your pet to be comfortable without shaking it. Fill the bathtub so that the water rises to your companion’s belly .
- For example, if your pet’s lower abdomen is 30 cm from the floor, you should fill the tub 30 cm.
- If you wash a smaller animal, such as a ferret, fill a large bucket with warm water instead of putting it in the bathtub.
Soak it in the bath to wet it. Avoid getting water in his eyes or ears, as this can irritate them. Make sure the fur is wet before continuing.
- This is all the more important for animals with thick coats, as you are going to need more water to wet them completely.
Pour the dishwashing liquid over the fur and lather. The amount of dishwashing liquid you need depends on the size of your pet, as well as the flea population. Start with a small amount (for example between two and three teaspoons) and add more if necessary. Start by applying the washing-up liquid to the neck and go down to the tail.
- Avoid putting it in the eyes or ears.
- Rub it gently, but make sure that the product penetrates to the skin, because this is where the fleas hide. If he moans, it means you are rubbing too hard.
- If its fur is particularly thick, try brushing it to make the soap penetrate further.
Tip: since the fleas will rush towards the neck when you start applying the product, it is better that you start with this area before going down to the rest of the body. This will create a barrier that will prevent fleas from taking refuge on the face or ears.
Wait five minutes, then rinse. Leave about five minutes for the dish soap to kill all the fleas before rinsing. Use a cup of water or the shower head to rinse off the foam. Start at the top and descend slowly to the tail .
- For best results, you can use a flea comb while you rinse it to make sure you remove as much of it as possible.
- You may need to use a large amount of water on a single area to completely rinse the foam in the hair.
- Be very careful when rinsing it around the eyes. If you put foam in his eyes, rinse with cold water and pat dry with a towel.
Empty the bathtub and dry your pet with a towel. Once you no longer see live fleas in its fur, drain the water from the tub. Rub it gently with a towel until it is completely dry .
- You can also use a hair dryer to dry it, but you will take less risk by using a towel.
- If you want to make sure you eliminate as many fleas as possible, run the flea comb through its fur once it is completely dry to catch those that you could have missed during the bath.
- If you have a cat, this experience will probably agitate him and he will run away at the slightest opportunity. Be careful when you dry it that it won’t scratch you.
Repeat if you still see fleas. Some of them could have survived the first treatment with dishwashing liquid. Do not forget that they hide at the level of the head and the face. This means that you will probably have to add a very small drop of washing up liquid to your pet’s head on the second pass .
- You may need to wash it again once or twice, depending on the amount of fleas it has.
- If you still see it after several days, give it a new bath every two to three days, then use flea product to kill the stubborn. You could also put on a flea collar or use a skin product like Frontline.
- To make sure there are none left, vacuum the floor and cloth furniture often (at least once a day) to kill all the fleas and their eggs.